*rohs directive 2002/95/ec jan 27 2003 including annex january 2005 - revised may 2007 specifications are subject to change without notice. customers should verify actual device performance in their specific applications. tisp3xxxh3sll overvoltage protector series tisp3070h3sll, tisp3250h3sll, TISP3290H3SLL dual bidirectional thyristor overvoltage protectors 3-sip (long lead) package (top view) *rohs compliant itu-t k.20/21 rating ..........................8 kv 10/700, 200 a 5/310 low differential capacitance .........................................< 67 pf 3-pin through-hole packaging - compatible with to-220ab pin-out ion-implanted breakdown region - precise and stable voltage low voltage overshoot under surge rated for international surge wave shapes - single and simultaneous impulses device name v drm v v (bo) v tisp3070h3sll 58 70 tisp3250h3sll 190 250 TISP3290H3SLL 220 290 wave shape standard i ppsm a 2/10 gr-1089-core 500 8/20 iec 61000-4-5 300 10/160 tia-968-a 250 10/700 tia-968-a itu-t k.20/21 200 10/560 tia-968-a 160 10/1000 gr-1089-core 100 mdxxaz a 1 2 3 t g r device symbol g t r sd3xaaa description the tisp3xxxh3sll limits overvoltages between the telephone line ring and tip conductors and ground. overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line. the protector consists of two symmetrical voltage-triggered bidirectional thyristors. overvoltages are initially clipped by bre akdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on state. this low-voltag e on state causes the current resulting from the overvoltage to be safely diverted through the device. the high crowbar holding current prevents d.c. latchup as the diverted current subsides. the tisp3xxxh3sll range is designed to voltage limit and withstand the listed international lightning surges in both polarities . these high current protection devices are in a 3-pin long-lead single-in-line (sll) plastic package and are supplied in tube pack. these m onolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and matched breakover control and are vi rtually transparent to the system in normal operation. how to order device package carrier marking code tube qty. tisp3xxxh3sll 3-sip (long lead) tube tisp3xxxh3sll-s sp3xxxh3 50 std. qty. 1000 order as ..................................................ul recognized component
january 2005 - revised may 2007 specifications are subject to change without notice. customers should verify actual device performance in their specific applications. tisp3xxxh3sll overvoltage protector series absolute maximum ratings, t a = 25 ? (unless otherwise noted) rating symbol value unit repetitive peak off-state voltage '3070 '3250 '3290 v drm 58 190 220 v non-repetitive peak impulse current (see notes 1, 2 and 3) 2/10 s (gr-1089-core, 2/10 s voltage wave shape) 8/20 s (iec 61000-4-5, 1.2/50 s voltage wave shape, 8/20 s current combination wave generator) 10/160 s (tia-968-a, 10/160 s voltage wave shape) 5/200 s (vde 0433, 10/700 s voltage waveshape) 0.2/310 s (i 31-24, 0.5/700 s voltage waveshape) 5/310 s (itu-t k.20/21, 10/700 s voltage wave shape) 5/310 s (ftz r12, 10/700 s voltage waveshape) 5/320 s (tia-968-a, 9/720 s voltage wave shape) 10/560 s (tia-968-a, 10/560 s voltage wave shape) 10/1000 s (gr-1089-core, 10/1000 s voltage wave shape) i ppsm 500 300 250 220 200 200 200 200 160 100 a non-repetitive peak on-state current (see notes 1, 2 and 4) i tsm 55 60 1 a 20 ms, 50 hz (full sine wave) 16.7 ms 60 hz (full sine wave) 1000 s, 50 hz a.c. initial rate of rise of on-state current, exponential current ramp, maximum ramp value < 200 a di t /dt 400 a/ s junction temperature t j -40 to +150 c storage temperature range t stg -65 to +150 c notes: 1. initially the device must be in thermal equilibrium with t j = 25 c. 2. these non-repetitive rated currents are peak values of either polarity. the rated current values may be applied to the r or t terminals. additionally, both r and t terminals may have th eir rated current values applied si multaneously (in this case the g terminal return current will be the sum of the currents applied to the r and t terminals). the surge may be repeated after the device returns to its initial conditions. 3. above 85 c, derate linearly to zero at 150 c lead temperature. 4. eia/jesd51-2 environment and eia/jesd51-3 pcb with standard footprint dimensions connected with 5 a rated printed wiring track widths. derate current values at -0.61%/ c for ambient tempeartures above 25 c. parameter test conditions min typ max unit i drm repetitive peak off-state current v d = v drm t a = 25 c t a = 85 c 5 10 a v (bo) breakover voltage dv/dt = 750 v/ms, r source = 300 ? '3070 '3250 '3290 70 250 290 v v (bo) impulse breakover voltage dv/dt 1000 v/ s, linear voltage ramp, maximum ramp value = 500 v di/dt = 20 a/ s, linear current ramp, maximum ramp value = 10 a '3070 '3250 '3290 78 261 302 v i (bo) breakover current dv/dt = 750 v/ms, r source = 300 ? 150 600 ma v t on-state voltage i t = 5a, t w = 100 s 3v i h holding current i t = 5 a, di/dt = 30 ma/ms 150 600 ma dv/dt critical rate of rise of off-state voltage linear voltage ramp, maximum ramp value < 0.85v drm 5 kv/ s i d off-state current v d = 50 v t a = 85 c 10 a electrical characteristics for the r and g or t and g terminals, t a = 25 ? (unless otherwise noted)
january 2005 - revised may 2007 specifications are subject to change without notice. customers should verify actual device performance in their specific applications. tisp3xxxh3sll overvoltage protector series electrical characteristics for the r and g or t and g terminals, t a = 25 ? (unless otherwise noted) (continued) c o off-state capacitance f = 100 khz, v d = 1 v rms, v d = 0 v f = 100 khz, v d = 1 v rms, v d = -1 v f = 100 khz, v d = 1 v rms, v d = -2 v f = 100 khz, v d = 1 v rms, v d = -50 v f = 100 khz, v d = 1 v rms, v d = -100 v '3070 '3250 & '3290 '3070 '3250 & '3290 '3070 '3250 & '3290 '3070 '3250 & '3290 '3250 & '3290 170 84 150 67 140 62 73 28 26 pf parameter test conditions min typ max unit electrical characteristics for the r and t terminals, t a = 25 ? (unless otherwise noted) parameter test conditions min typ max unit i drm repetitive peak off-state current v d = 2v drm 5 a v (bo) breakover voltage dv/dt = 750 v/ms, r source = 300 ? '3070 '3250 '3290 140 500 580 v v (bo) impulse breakover voltage dv/dt 1000 v/ s, linear voltage ramp, maximum ramp value = 500 v di/dt = 20 a/ s, linear current ramp, maximum ramp value = 10 a '3070 '3250 '3290 156 522 604 v thermal characteristics, t a = 25 ? (unless otherwise noted) parameter test conditions min typ max unit r ja junction to ambient thermal resistance eia/jesd51-3 pcb, i t = i tsm(1000) (see note 5) 50 c/w note: 5. eia/jesd51-2 environment and pcb has standard footprint dimensions connected with 5 a rated printed wiring track widths.
january 2005 - revised may 2007 specifications are subject to change without notice. customers should verify actual device performance in their specific applications. tisp3xxxh3sll overvoltage protector series parameter measurement information -v i (br) v (br) v (br)m v drm i drm v d i h i t v t i trm i ppsm v (bo) i (bo) i d quadrant i switching characteristic +v +i v (bo) i (bo) i (br) v (br) v (br)m v drm i drm v d i d i h i t v t i trm i ppsm -i quadrant iii switching characteristic i tsm i tsm figure 1. voltage-current characteristic for terminal pairs pm-tisp4xxx-001-a
?isp?is a trademark of bourns, ltd., a bourns company, and is registered in u.s. patent and trademark office. ?ourns?is a registered trademark of bourns, inc. in the u.s. and other countries. bourns sales offices region phone fax the americas: +1-951-781-5500 +1-951-781-5700 europe: +41-41-7685555 +41-41-7685510 asia-pacific: +886-2-25624117 +886-2-25624116 technical assistance region phone fax the americas: +1-951-781-5500 +1-951-781-5700 europe: +41-41-7685555 +41-41-7685510 asia-pacific: +886-2-25624117 +886-2-25624116 www.bourns.com bourns products are available through an extensive network of manufacturer s representatives, agents and distributors. to obtain technical applications assistance, a quotation, or to place an order, contact a bourns representative in your area.
|
